Symptom Chart
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Jaguar S-Type, 2007 Jaguar S-Type, 2006 Jaguar S-Type, 2005 Jaguar S-Type, and 2004 Jaguar S-Type. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Network DTCs may be set by an error, or communications failure in the network. Individual DTCs are in the table, alongside their respective modules, but may also be set by a combination of factors affecting the network, which would result in multiple DTCs being set for one error, or, as in the case of an open circuit, no DTC being set.
Symptom Chart
| Condition | Possible Source | Action |
|---|---|---|
| DTC; P1637. P1799, E521, E516: The module Does Not Respond to the Jaguar approved diagnostic system - anti-lock brake control module or DSC. | Wire or connection in the control area network (CAN). anti-lock brake control module or DSC. |
Refer to Pinpoint Test A . |
| DTC; P1699, E518, E516: The module Does Not Respond to the Jaguar approved diagnostic system - Climate control module. | Wire or connection in the CAN network. DATC. |
Refer to Pinpoint Test B . |
| DTC; P1638, P1798, E520, E516: The module Does Not Respond to the Jaguar approved diagnostic system - instrument cluster (IC). | Wire or connection in the SCP network. Wire or connection in the CAN network. IC. |
Refer to Pinpoint Test C . |
| DTC; E516, P1797, P1642, The module Does Not Respond to the Jaguar approved diagnostic system - ECM. | Wire or connection in the CAN network. ECM. |
Refer to Pinpoint Test D . |
| DTC; P1643, P1796, E522: The module Does Not Respond to the Jaguar approved diagnostic system - transmission control module (TCM). | Wire or connection in CAN network. TCM and main control valve body. |
Refer to Pinpoint Test E . |
| P1603. TCM EEPROM failure. | Battery discharged. TCM has lost it's adaptive values. Water ingress into TCM or connections. TCM failure. |
Refer to Pinpoint Test F . |
| The module Does Not Respond to the Jaguar approved diagnostic system - Electronic park brake (EPB) module. | Wire or connection in the SCP network. EPB module. |
Refer to Pinpoint Test G . |
| The module Does Not Respond to the Jaguar approved diagnostic system - Instrument cluster (IC). | Wire or connection in the SCP network. IC. |
Refer to Pinpoint Test H . |
| The module Does Not Respond to the Jaguar approved diagnostic system - Rear electronic module (REM). | Wire or connection in the SCP network. REM. |
Refer to Pinpoint Test I . |
| The module Does Not Respond to the Jaguar approved diagnostic system - Active damping control module (ADCM) | Wire or connection in the SCP network. ADCM. |
Refer to Pinpoint Test J . |
| The module Does Not Respond to the Jaguar approved diagnostic system - Driver's door module (DDM) | Wire or connection in the SCP network. DDM. |
Refer to Pinpoint Test K . |
| The module Does Not Respond to the Jaguar approved diagnostic system - Dynamic stability control module (DSM). | Wire or connection in the SCP network. DSM. |
Refer to Pinpoint Test L . |
| The module Does Not Respond to the Jaguar approved diagnostic system - in car entertainment (ICE) head. | Wire or connection in the SCP network. ICE head. |
Refer to Pinpoint Test M . |
| The module Does Not Respond to the Jaguar approved diagnostic system - front electronics module (FEM). | Wire or connection in the SCP network. FEM. |
Refer to Pinpoint Test N . |
| The module Does Not Respond to the Jaguar approved diagnostic system - navigation control module (NC). | Wire or connection in SCP network. NC. |
Refer to Pinpoint Test O . |
| The module Does Not Respond to the Jaguar approved diagnostic system- restraints control module. | Wire or connection in the ISO 9141 network. RCM. |
Refer to Pinpoint Test P . |
| The module Does Not Respond to the Jaguar approved diagnostic system- Headlamp levelling module (ADHLS) | Wire or connection in the ISO 9141 network. ADHLS. |
Refer to Pinpoint Test Q . |
| The module Does Not Respond to the Jaguar approved diagnostic system- reverse park aid module. | Wire or connection in the ISO 9141 network. reverse park aid module. |
Refer to Pinpoint Test R . |
| The module Does Not Respond to the Jaguar approved diagnostic system- Intrusion sensor module. | Wire or connection in the ISO 9141 network. Intrusion sensor module. |
Refer to Pinpoint Test S . |
| The module Does Not Respond to the Jaguar approved diagnostic system- powertrain control module. | Wire or connection in the ISO 9141 network. ECM. |
Refer to Pinpoint Test T . |
| U2003. The module Does Not Respond to the Jaguar approved diagnostic system - voice activated control module (VACM). | Wire or connection in SCP network. VACM. |
Refer to Pinpoint Test U . |
| U2008. The module Does Not Respond to the Jaguar approved diagnostic system - 'phone module. | Wire or connection in the SCP network. Wire or connection in the D2B network. 'phone module. |
Refer to Pinpoint Test V . |
| P1573, P1609, P1777. Sympathetic DTCs from modules in CAN network. | DTCs set as a result of DTCs from other modules in CAN network. | Refer to Pinpoint Test W . |
| U2003, The module Does Not Respond - compact disc changer. (CDDJ). | Fibre optic or connection in the D2B network. CDDJ. |
Refer to Pinpoint Test X . |
| U2008, The module Does Not Respond - 'phone module. | Fibre optic or connection in the D2B network. 'phone module. |
Refer to Pinpoint Test Y . |
| U2019, The module Does Not Respond - voice activated control module. (VACM). | Fibre optic or connection in the D2B network. VACM |
Refer to Pinpoint Test Z . |
| U2613, The module Does Not Respond - navigation control module. (NC). | Fibre optic or connection in the D2B network. |
Refer to Pinpoint Test AA . |
| U2614, The module Does Not Respond - Amplifier. | Fibre optic or connection in the D2B network. | Refer to Pinpoint Test AB . |
| U2602. Break in the optical harness from the ICE head unit. (Transmitter). | Fibre optic or connection in the D2B network. | Refer to Pinpoint Test AC . |
| U2603. Break in the optical harness to the ICE head unit. (Receiver) | Fibre optic or connection in the D2B network. | Refer to Pinpoint Test AD . |
| One or more D2B modules not responding. "Wake-up" signal fault. | Faulty "wake-up" signal circuit. | Refer to Pinpoint Test AE . |
| One or more D2B modules not responding. Permanent supply fault. | Faulty permanent supply circuit. | Refer to Pinpoint Test AF . |
| One or more D2B modules not responding. Accessory switched supply fault. | Faulty accessory switched supply circuit. | Refer to Pinpoint Test AG . |
| One or more D2B modules not responding. Ignition switched supply fault. | Faulty ignition switched supply circuit. | Refer to Pinpoint Test AH . |