LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jaguar >> 2002 >> XKR Base, 2D Convertible >> Repair and Diagnosis >> Transmission >> Automatic Trans >> External Control >> Removal & Installation >> Selector Lever Indicator Assembly >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Selector Lever Indicator Assembly: Removal

  1. Remove battery cover and disconnect ground cable from battery terminal. Refer to BATTERY DISCONNECTION PROCEDURE .
  2. Remove the selector lever knob. See TRANSMISSION SELECTOR LEVER KNOB .
  3. Remove the J-gate surround. See SELECTOR LEVER GATE FINISH PANEL .
  4. Remove the console finisher veneer panel. See FLOOR CONSOLE FINISH PANEL .
  5. Remove the selector indicator module screws.
    Fig 1: Removing Selector Indicator Module Screws
    G00378928Courtesy of JAGUAR CARS, INC.
  6. Remove the selector indicator module.
    1. Free the D to 4 switch harness multiplug from the mounting bracket and disconnect the multiplug.
    2. Displace the P switch multiplug from the mounting bracket.
    3. Route the D to 4 harness from under the P switch harness.
    Fig 2: Disconnecting & Connecting Selector Module Electrical Connectors
    G00378929Courtesy of JAGUAR CARS, INC.
scientia non olet · About LEMON Manuals