Remote Keyless Entry Transmitter
NOTE:
All remote transmitters are programmable and must be set at the same time. If an attempt is made to program a fifth remote entry device after four remote entry devices have already been programmed, the attempt shall erase all remote entry device associations and start a new set of four remote entry device associations with fifth remote device programming attempt.
Programming (or reprogram) of remote transmitters into remote keyless entry Driver Door Module (DDM) is carried out with PDU. Due to complexity of the electronics involved with the remote keyless entry, of which the DDM is a part, and the multiplexed communication network which are connected to it preclude the use of general electrical test equipment. Therefore, reference should be made to the PDU User Guide for detailed instructions on programming the remote transmitters.