Recirculation Blend Door Actuator - Removal and Installation: Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2009 Jaguar XKR, 2009 Jaguar XK8, 2008 Jaguar XKR, 2008 Jaguar XK8, and 2007 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
- Install the servo motor assembly.
- Align the servo motor drive.
- Install the screws.
- Connect the electrical connector.
- Install the instrument panel. Refer to Instrument Panel article.
- Connect the battery ground cable and install the cover. Refer to Specifications article.