LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jaguar >> 2012 >> XF Base >> Repair and Diagnosis >> General Information >> Traction Control Disable Procedures >> Traction Control Disable
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Traction Control Disable

WARNING: Placing a non-compatible vehicle on a single-axle dynamometer could result in a safety hazard to technicians and damage to vehicle. Vehicles which use All-Wheel Drive (AWD) or traction control may not be clearly marked. Use common sense and take all necessary precautions when placing any vehicle on the dynamometer. Determine between full-time 4WD and All-Wheel Drive (AWD) for testing purposes. The following tables include information related to full-time 4WD and AWD vehicles, and how to disable the traction control system (if disengageable).
WARNING: DO NOT operate vehicle on a 2-wheel dynamometer if the DO NOT TEST column is marked.
JAGUAR

Application FWD RWD Part Time 4WD Full Time 4WD AWD TCS Do Not Test
E-Pace
2019-24 X ... ... ... ... (3) X ...
F-Pace (X761)
2017-25 ... ... ... X ... ... X
F-Type (X152)
2016-17 (AWD) ... ... ... ... X ... X
2014-24 (RWD) ... X ... ... ... X (3) ...
I-Pace
2019-25 ... ... ... ... X (3) X ...
XE Series (X760)
2017-24 (AWD) ... ... ... ... X ... X
2017-24 (RWD) ... X ... ... ... X (3) ...
XF Series (X250 & X260)
2013-24 (AWD) ... ... ... ... X ... X
2009-24 (RWD) ... X ... ... ... X (5) ...
XJ Series
1995-97 (X300) ... X ... ... ... X (1) ...
1998-03 (X308) ... X ... ... ... X (2) ...
2004-09 (X350) ... X ... ... ... X (3) ...
2013-19 (AWD - X351) ... ... ... ... X ... X
2010-19 (RWD - X351) ... X ... ... ... X (5) ...
XK Series
1999-06 (X100) ... X ... ... ... X (2) ...
2006-15 (X150) ... X ... ... ... X (5) ...
S-Type (X200)
2000-03 (With Auto Stability Control) ... X ... ... ... X (2) ...
2000-03 (With Dynamic Stability Control) ... X ... ... ... X (3) ...
2004-08 ... X ... ... ... X (4) ...
X-Type (X400)
2002-08 ... ... ... ... X ... X
(1) Press switch located on dash. Indicator light on instrument panel will illuminate when system is disabled.
(2) Pressing TRAC OFF or Automatic Stability Control (ASC) switch, on console near shift lever, disables system. Indicator light on instrument panel will illuminate when system is disabled.
(3) Press Dynamic Stability Control (DSC) switch near shift lever or center console. Indicator light will illuminate and a short warning chime will sound when system is disabled.
(4) Press Dynamic Stability Control (DSC) switch below radio. Indicator light on the instrument cluster will illuminate when system is disabled.
(5) Press and hold the DSC switch (At the shift lever or center console) for more than 10 seconds (Pushing for less than 10 seconds allows the system to switch between DSC and Trac DSC). The message center will display DSC OFF and a short warning chime will sound.