LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jaguar >> 2019 >> I-Pace First Edition >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Drive Control -- I-Pace/X590 >> Drive Control >> Removal And Installation >> Powertrain Control Module (G2219126) >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Powertrain Control Module (G2219126): Installation

    • Install the Powertrain Control Module (PCM) to the bracket.
    • Tighten the 4 bolts.

      Torque  : 3.2Nm 

    • Install the PCM and bracket.
    • Tighten the 4 bolts.

      Torque  : 9Nm 

  3. Connect the 2 electrical connectors.
  4. Install the cowl panel.

    Refer to: COWL PANEL .

  5. Connect the startup battery ground cable.

    Refer to: 12V SYSTEM DISCONNECT .

  6. If a new component is installed, configure using Jaguar Land Rover approved diagnostic equipment.

    General Equipment  : Jaguar Land Rover approved diagnostic equipment 

scientia non olet · About LEMON Manuals