Removal & Installation
WARNING: This page is about the XF R-Dynamic SE, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| 2.0L Eng,Gas,AWD | | 5.0 | | C |
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: |
| Rear | | 0.5 | | B |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.3 | | C |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.1 | | C |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: |
| Includes: Programming. | 0.8 | | C |
TRANS ID - ZF, 5HP24, 6HP26, 6HP28, 8HP45, 8HP70
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| AWD | | 6.4 | | C |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.3 | | C |
| Combination Procedure: FRONT PUMP &/OR SEAL: Remove & Replace: |
| | 0.6 | | B |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.3 | | C |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: |
| | 0.7 | | C |