LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1989 >> Comanche Eliminator, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> 2.5L TBI CEC Testing >> Component Testing >> Heated Oxygen (O2) Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Heated Oxygen (O2) Sensor

NOTE: For additional oxygen sensor information, see TITANIA OXYGEN SENSOR TESTING article.
  1. On Comanche, Cherokee and Wagoneer, disconnect O2 sensor connector. Using an ohmmeter, connect ohmmeter leads to sensor connector terminals "A" and "C" (marked on connector).
  2. On Wrangler, connect ohmmeter leads to sensor connector terminals "A" and "B" (marked on connector).
  3. Ohmmeter should read between 5-7 ohms resistance. Replace O2 sensor if reading is not within specification or if ohmmeter displays an infinity reading.
scientia non olet · About LEMON Manuals