LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1990 >> Wrangler Laredo, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Controls - Adjustments >> Ignition Timing >> Timing >> 4.2L 6-Cylinder
April 5, 2026: LEMON Manuals is launched! Read the announcement.

4.2L 6-Cylinder

  1. Set parking brake. Shift automatic transmission to Park or manual transmission to Neutral. With A/C off, start engine and attain normal operating temperature.
  2. With ignition OFF, connect an ignition timing light and a calibrated, expanded-scale tachometer.
    NOTE: If timing light has an adjustable advance control feature, turn control to OFF position.
  3. Disconnect 4 " and 10 " Hg (CEC System) vacuum switch assembly wire connector (located at top of valve cover). Disconnect and plug distributor vacuum advance hose.
  4. Start engine, increase engine speed to 1600 RPM and check ignition timing. Adjust timing to specification listed on Emission Control Information label (if necessary). Tighten distributor hold-down clamp and recheck ignition timing.
  5. Turn engine off and remove timing light and tachometer. Connect No. 1 spark plug lead, if disconnected. Unplug and connect distributor vacuum advance hose. Connect vacuum switch assembly wire connector.
scientia non olet · About LEMON Manuals