LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1991 >> Cherokee Laredo, 2D Utility, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes >> Self-Diagnostic System >> DRB-II Test Functions >> Configure Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Configure Mode

  1. Configure option allows user to VIEW or CHANGE DRB-II display to US/METRIC, KEY CLICK, KEY REPEAT, or REMOTE DISPLAY. All selections made under CONFIGURE option remain active until user changes selection.
  2. To access how to use mode, ensure ignition is off. Attach DRB-II to engine diagnostic connector. Connector is located on left side of engine compartment, near SBEC-II. See Figure . Turn ignition switch to RUN position.
  3. The copyright information and diagnostic program version will appear on screen for a few seconds. After a few seconds DRB-II menu will appear. At DRB-II menu, press "3" (CONFIGURE) key. Press ENTER key. DRB-II will display CONFIGURE menu.
  4. Selecting VIEW from CONFIGURE menu allows user to view setting of CONFIGURE functions. Selecting CHANGE from CONFIGURE menu allows user to change setting of CONFIGURE functions.
  5. Selecting US/METRIC function allows user to have sensor, input/output values displayed in either US/METRIC units. Selecting KEY CLICK allows user to have a Green light come on or have a beeper sound whenever a DRB-II key is pressed.
  6. If REPEAT KEY function is on, the down/up arrow key will scroll the DRB-II display repeatedly. If REPEAT KEY function is off, the down/up arrow will scroll the DRB-II display only one item at a time. Selecting REMOTE DISPLAY function allows user to have DRB-II screen displayed on another screen.
scientia non olet · About LEMON Manuals