Ignition Coil Resistance Test
- Remove primary and secondary leads from ignition coil. Using ohmmeter, check primary resistance between positive and negative terminals of coil. See IGNITION COIL RESISTANCE SPECIFICATIONS table.
- Check secondary resistance between center tower and negative terminal of coil. See IGNITION COIL RESISTANCE SPECIFICATIONS table. Replace coil if readings are not within specification.
IGNITION COIL RESISTANCE SPECIFICATIONS
| Application | Ohms | ||
|---|---|---|---|
| Primary Resistance | |||
| 75°F (24°C) | .95-1.20 | ||
| Secondary Resistance | |||
| 75°F (24°C) | |||
| Toyodenso | 11,300-15,300 | ||
| Diamond | 11,300-13,300 | ||