READ FAULTS Mode

This function allows the user to read and erase fault codes. A start counter will appear below DRB-II fault counter display. Start counter counts the number of times vehicle is started since faults were last set, erased, or battery was disconnected. Start counter will count up to 255 starts.

Memory space limits start counter to first 3 faults. Start counter of zero equals a hard fault. Any other fault is classified as an intermittent fault. This helps determine if fault is intermittent. If no fault messages are stored, DRB-II will display NO FAULTS DETECTED and start counter will show 0 STARTS SINCE ERSD.