LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1994 >> Wrangler S, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Fuel System >> Fuel Pressure >> Capacity (Volume) Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Capacity (Volume) Test

  1. Relieve fuel system pressure. See FUEL SYSTEM PRESSURE RELEASE under FUEL PRESSURE  . Disconnect fuel line on fuel rail. Place fuel line into a graduated container.
  2. Remove fuel pump relay (located in power distribution center). Using a jumper wire, connect terminals No. 30 and 87. See Figure . Volume of fuel should be one pint. (.47L) in 30 seconds. If fuel volume is not as specified, check for a plugged fuel filter or fuel pump inlet sock.
scientia non olet · About LEMON Manuals