Test VER-1B - Verification Procedure
Ensure ignition is off. Reconnect all previously disconnected components and connectors. Ensure all repairs have been made. Turn ignition on. Actuate system that was not operational. If system operates properly, repair is complete. If system does not operate properly, go to TEST 1A - IDENTIFYING VEHICLE EQUIPMENT & SYSTEM PROBLEMS .
NOTE:
Some vehicles may not have specific module/system listed in test. If vehicle is not equipped with module/system specified in test step, proceed to next step. For module/system options available, see MODULE APPLICATIONS
table.
MODULE APPLICATIONS
| Modules | Body | ||
|---|---|---|---|
| Automatic Temperature Control (ATC) (1) | ZJ | ||
| Controller, Anti-Lock Brake (CAB) | XJ, YJ, ZJ | ||
| Compass/Temperature Monitor | ZJ | ||
| Powertrain Control Module (PCM) | XJ, YJ, ZJ | ||
| 6Vehicle Theft Security System (VTSS) | XJ, ZJ | ||
|
|||