LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1995 >> Wrangler S, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - Body Control Computer >> Vehicle Communication Tests >> Test VER-1 - Verification Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test VER-1 - Verification Procedure

  1. Ensure ignition is off and scan tool is connected. Reconnect all previously disconnected components and connectors. Turn ignition on. If scan tool screen is blank, go to TEST 2A . If scan tool screen is not blank, go to next step.
  2. If there is a BUS failure message on scan tool, go to TEST 1A . If there is no BUS failure message on scan tool, select module in question. If scan tool shows NO RESPONSE, return to appropriate diagnostic article and perform indicated test.
  3. If scan tool does not show NO RESPONSE, inspect vehicle for original complaint. If original complaint is present, return to appropriate diagnostic article and perform indicated test. If original complaint is not present, repair is complete.
scientia non olet · About LEMON Manuals