LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2000 >> Cherokee Classic, 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> System Tests >> Communications >> No Termination
April 5, 2026: LEMON Manuals is launched! Read the announcement.

No Termination

  1. Ensure ignition off. Disconnect Powertrain Control Module (PCM) Gray connector. See COMPONENT LOCATIONS  . Connect a jumper wire between ground and PCM Gray connector C3 terminal No. 30 (Violet/Brown wire). See Figure . Turn ignition on. Using scan tool, select SYSTEM MONITORS. Perform CCD BUS test. If scan tool displays BUS SHORT TO GROUND, go to next step. If scan tool does not display BUS SHORT TO GROUND, repair open in Violet/Brown wire. Perform BODY VERIFICATION TEST  under VERIFICATION TESTS.
  2. Move jumper wire to PCM Gray connector C3 terminal No. 28 (White/Black wire). Perform CCD BUS test. If scan tool does not display BUS SHORT TO GROUND, repair open in White/Black wire. If scan tool displays BUS SHORT TO GROUND, replace PCM and instrument cluster. See appropriate INSTRUMENT PANELS article. See POWERTRAIN CONTROL MODULE  under REMOVAL & INSTALLATION. Perform BODY VERIFICATION TEST  under VERIFICATION TESTS.
scientia non olet · About LEMON Manuals