Engine Controls - Tests W/O Codes: Symptoms: Backfire

Check listed items as follows:

• On Cherokee 2.5L, check secondary ignition system. See CHECKING SECONDARY IGNITION (2.5L) under IGNITION SYSTEMS in BASIC DIAGNOSTIC PROCEDURES article.
• Check Powertrain Control Module (PCM) power and ground circuits. See POWERTRAIN CONTROL MODULE under COMPUTERIZED ENGINE CONTROLS in SYSTEM & COMPONENT TESTING article.
• Check fuel pressure. See FUEL PRESSURE TEST under FUEL SYSTEMS in BASIC DIAGNOSTIC PROCEDURES article.
• Check manifold absolute pressure sensor. See CHECKING MAP SENSOR CALIBRATION under ENGINE SENSORS & SWITCHES in SYSTEM & COMPONENT TESTING article.
• On 2.5L and 4.0L, check minimum idle airflow. See CHECKING MINIMUM AIRFLOW (2.5L & 4.0L) under IDLE CONTROL SYSTEMS in SYSTEM & COMPONENT TESTING article.
• Check oxygen sensor switching. See CHECKING OXYGEN SENSOR SWITCHING under ENGINE SENSORS & SWITCHES in SYSTEM & COMPONENT TESTING article.