LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2001 >> Cherokee Classic, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> Verification Tests >> Powertrain Verification Test VER-1
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Powertrain Verification Test VER-1

NOTE: If Powertrain Control Module (PCM) has been replaced and correct Vehicle Identification Number (VIN) and mileage have not be entered into new PCM, Diagnostic Trouble Codes (DTC) will set in Anti-lock Brake System (ABS), Air Bag Control Module (ACM) and Sentry Key Immobilizer Module (SKIM). Secret key data must be updated prior to starting vehicle. See PROGRAMMING  .
  1. Inspect vehicle to ensure all engine components are connected. Reassemble and reconnect components as necessary. Check engine oil for fuel contamination. Change oil and filter if necessary.
  2. Start engine and allow to run until operating temperature is reached. Using scan tool, ensure no DTCs have reset. If any DTCs reset, check for Technical Service Bulletins (TSB). If different DTCs set, perform appropriate test in accordance with DTC retrieved. See DIAGNOSTIC TROUBLE CODE DEFINITIONS  table under SELF-DIAGNOSTIC SYSTEM. If DTCs do not exist, repair is complete. If no DTCs are set, repair is complete.
scientia non olet · About LEMON Manuals