Remote Keyless Entry

When the lock button on the transmitter is pressed, all locks will lock, illuminated entry will be turned off, (providing all doors are closed) and the vehicle theft security system (if equipped) will be armed. When the unlock button on the transmitter is pressed one time, the driver front door will unlock, the illuminated entry will turn on the courtesy lamps, the vehicle theft security system (if equipped) will be disarmed. When the button is pressed a second time, the other doors will unlock. This feature is programmable to open all doors on one press using the EVIC or the DRBIII(R). The Passenger Door Module (PDM) contains the RKE receiver. When the PDM receives a valid signal from the RKE transmitter, it will send a signal on the PCI bus to lock or unlock the doors. The RKE transmitter uses radio frequency signals to communicate with the RKE receiver. If vehicle is equipped with the memory system, the memory message will be received as to which transmitter (1 or 2) sent the signal.