Secured Access Method

The Secured Access method applies to all vehicles. This method requires the use of a DRBIII(R) scan tool. This method will also require that you have access to the unique four-digit PIN code that was assigned to the original SKIM. The PIN code must be used to enter the Secured Access Mode in the SKIM.

1. Obtain vehicle's unique PIN number assigned to it's original SKIM module from vehicle owner or Chrysler's customer center.
2. Using scan tool, select THEFT ALARM, SKIM, then MISCELLANEOUS.
3. Select SKIM MODULE REPLACED function.
4. Program vehicle's VIN number into SKIM memory.
5. Program country code into SKIM's memory (U.S.).
6. Select UPDATE VIN (SKIM will learn VIN from PCM).
7. Press ENTER to transfer VIN from PCM to SKIM.

After programming new SKIM, go to PROGRAMMING BLANK SENTRY KEYS USING SCAN TOOL under SENTRY KEYS to program all keys to new SKIM.