VTSS Verification Test 1A
- Ensure all doors, hood, liftgate and liftgate flip-up are closed.
- Open the driver's door.
- Remove the ignition key (but keep in hand).
- Lower the driver door window and lock the doors with RKE transmitter.
- Close the driver's door.
- Observe the VTSS Indicator.
- The VTSS Indicator will flash rapidly for approximately 15 seconds and then begin to flash slowly. The VTSS indicator not performing as described indicates a system fault. Go to THEFT ALARM WILL NOT ARM under VEHICLE THEFT/SECURITY SYSTEMS.
- Perform a system test on the VTSS by duplicating the original complaint.
- Disarm the system and with the DRBIII(R), read DTC's.
- If the original complaint is corrected and there are no DTC's the repair is complete. Are any DTC's present or is the original complaint still present? If yes, repair is not complete. See DIAGNOSTIC TROUBLE CODE IDENTIFICATION table in RETRIEVING & CLEARING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM. Perform VTSS VERIFICATION TEST 1A under VERIFICATION TESTS If no, repair is complete.