General Information

SECURED ACCESS mode is not required to check programmed status of key.

If Powertrain Control Module (PCM) is replaced, unique secret key data must be transferred from Smart Key Immobilizer Module (SKIM) to PCM. This procedure requires SKIM to be placed in SECURED ACCESS mode using 4-digit Personal Identification Number (PIN) code.

If 3 attempts are made to enter secured access mode using an incorrect PIN, SECURED ACCESS mode will be locked out for one hour. To exit lock out mode, turn ignition switch to RUN position continuously for one hour. Ensure all accessories are turned off. Monitor battery state and connect battery charger if necessary.

To program smart keys using "customer programming method" requires 2 valid smart keys. See PROGRAMMING BLANK SENTRY KEYS USING CUSTOMER LEARN METHOD  .