LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2002 >> Wrangler X, Automatic >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> Programming >> Powertrain Control Module >> Updating Secret Key Data
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Updating Secret Key Data

  1. Connect scan tool to Data Link Connector (DLC). See Figure . Turn ignition on. Using scan tool, select THEFT ALARM, SKIM and MISCELLANEOUS.
  2. Place Smart Key Immobilizer Module (SKIM) in SECURED ACCESS mode by using appropriate Personal Identification Number (PIN) for this vehicle. PIN may be obtained from owner, vehicle's invoice, or from manufacturer. Select UPDATE THE SECRET KEY DATA. Data will be transferred from SKIM to PCM, allowing vehicle to start. If 3 attempts are made to enter secured access mode using an incorrect PIN, SECURED ACCESS mode will be locked out for one hour. To exit lock out mode, turn ignition switch to RUN position continuously for one hour. Ensure all accessories are turned off. Monitor battery state and connect battery charger if necessary.
scientia non olet · About LEMON Manuals