Front/Rear Wiper And Washer Switches (Right Multi-Function Switch Stalk)

The front windshield and rear liftglass wiper/ washer switches are located on the wiper multifunction switch stalk which is secured to the right side of the multi-function switch mounting housing on the steering column.

A knob on the end of the wiper multifunction switch stalk is rotated to select the desired front wiper speed (HIGH or LOW) or one of the five intermittent front wiper positions. The wiper stalk is pulled toward the driver to activate the windshield washer system. Both the front wiper and front washer motors will operate continuously for as long as the stalk is held in the momentary FRONT WASH position.

Another rotary switch on the wiper multifunction switch stalk is rotated to select the desired rear wiper speed (ON or DELAY). The wiper stalk is pushed toward the instrument panel to activate the rear liftglass washer system. Both the rear wiper and rear washer motors will operate continuously for as long as the stalk is held in the momentary REAR WASH position.

If any part of the right multi-function switch stalk is faulty or damaged, the entire wiper multifunction switch assembly must be replaced.