LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2004 >> Wrangler SE, Standard >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Intake Air Temperature Sensor >> Installation >> 2.4L
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Intake Air Temperature Sensor: Installation: 2.4L

  1. Check condition of sensor o-ring.
  2. Clean sensor mounting hole in intake manifold.
  3. Position sensor into intake manifold and rotate clockwise until past release tab.
  4. Install electrical connector.
scientia non olet · About LEMON Manuals