LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2004 >> Wrangler SE, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Emissions Control System >> Emissions Control >> Description >> Obtaining DTC'S Using DRB Scan Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Obtaining DTC'S Using DRB Scan Tool

  1. Obtain the applicable Powertrain Diagnostic Manual.
  2. Obtain the DRB Scan Tool.
  3. Connect the DRB Scan Tool to the data link (diagnostic) connector. This connector is located in the passenger compartment; at the lower edge of instrument panel; near the steering column.
  4. Turn the ignition switch on and access the "Read Fault" screen.
  5. Record all the DTC's and "freeze frame" information shown on the DRB scan tool.
  6. To erase DTC's, use the "Erase Trouble Code" data screen on the DRB scan tool. Do not erase any DTC's until problems have been investigated and repairs have been performed. 
scientia non olet · About LEMON Manuals