LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2004 >> Wrangler X, Automatic >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Accelerator Pedal >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Accelerator Pedal: Installation

  1. Place accelerator pedal assembly over mounting studs protruding from floor pan. Tighten mounting nuts to 8.5 N.m (75 in. lbs.) torque.
  2. Slide throttle cable into opening (slot) in top of pedal arm. An index tab is located on pedal arm. Rotate and push plastic cable retainer (clip) into accelerator pedal arm opening until it snaps into place on index tab.
  3. Before starting engine, operate accelerator pedal to check for any binding.
scientia non olet · About LEMON Manuals