EVAP/Purge Solenoid: Removal

The duty cycle EVAP canister purge solenoid is located in the engine compartment near the front of the brake master cylinder. It is attached to a slip-on type bracket.

Fig 1: Locating EVAP/Purge Solenoid

Courtesy of DAIMLERCHRYSLER CORP.

The EVAP System Test Port is located near the EVAP/Purge Solenoid.

1. Disconnect electrical wiring connector at solenoid.
2. Disconnect vacuum lines/hoses at solenoid.
3. Lift solenoid and rubber solenoid support from mounting bracket.