Cylinder - Ignition Key And Lock: Installation

Fig 1: Key Lock Cylinder Removal

Courtesy of DAIMLERCHRYSLER CORP.

Install ignition key into lock cylinder (1). Rotate key to "ON" position (retaining tab on side of lock cylinder (3) can now be depressed).
The shaft at end of key lock cylinder aligns with socket within end of housing. To align socket with lock cylinder, ensure socket is in "ON" position.
Position and align key lock cylinder with grooves in housing.

Fig 2: Key Cylinder Release Tab
Courtesy of DAIMLERCHRYSLER CORP.
Slide lock cylinder into housing until release tab (3) sticks through opening at side of housing.

Fig 3: Ignition Switch Bezel
Courtesy of DAIMLERCHRYSLER CORP.
Install bezel (1). Snaps on.
Connect negative battery cable.