LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2007 >> Commander Overland, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection - Diesel >> Sensor-Accelerator Pedal Position >> Removal >> Accelerator Pedal Position Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Accelerator Pedal Position Sensor

Fig 1: View Of Accelerator Pedal Assembly
GC0039516Courtesy of CHRYSLER LLC
1 - HARNESS CONNECTOR
2 - FASTENERS
3 - ACCELERATOR PEDAL ASSEMBLY
  1. Disconnect the negative battery cable.
  2. Remove the drivers side lower dash board close out panel.
  3. Disconnect the APP sensor electrical connector (1).
  4. Remove the accelerator pedal assembly fasteners (2) and the accelerator pedal assembly (3).
scientia non olet · About LEMON Manuals