LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2007 >> Commander Overland, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection - Diesel >> Sensor-Boost Pressure >> Installation >> Boost Pressure Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Boost Pressure Sensor

Fig 1: Locating Boost Pressure Sensor
GC0039522Courtesy of CHRYSLER LLC
1 - AIR FLOW CONTROL VALVE
2 - BOOST PRESSURE SENSOR
3 - CHARGE AIR CROSS OVER TUBE
4 - EGR TUBE
  1. Position the boost pressure sensor onto the charge air cross over tube and install the fasteners. See Fig 1. Tighten the fasteners to 9 N.m (80 in. lbs.).
  2. Connect the sensor wiring harness connector.
  3. Connect the negative battery cable.
scientia non olet · About LEMON Manuals