LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2007 >> Commander Overland, RWD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection - Gas >> Sensor-Oxygen >> Installation >> Oxygen Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Oxygen Sensor

Threads of new oxygen sensors are factory coated with anti-seize compound to aid in removal. DO NOT add any additional anti-seize compound to threads of a new oxygen sensor. 

  1. Install O2S sensor. Tighten to 41 N.m (30 ft. lbs.) torque.
  2. Connect O2S sensor wire connector.
  3. Lower vehicle.
scientia non olet · About LEMON Manuals