LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2008 >> Compass Limited, FWD, Automatic CVT >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection-Diesel >> Boost Pressure Sensor >> Removal >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Boost Pressure Sensor: Removal: Removal

  1. Disconnect negative battery cable.
  2. Remove the belly pan.
    Fig 1: Remove/Install Pedal And APPS Sensor
    GC0055506Courtesy of CHRYSLER LLC
  3. Disconnect the electrical connector (1) from the boost pressure sensor (3).
  4. Remove the 2 mounting bolts (2).
  5. Remove the boost pressure sensor (3) from the charge air tube (4).
scientia non olet · About LEMON Manuals