INJECTOR(S), Fuel: Installation: 5.7L

Fig 1: Injector Retaining Clip

Courtesy of CHRYSLER LLC

1 - PLIERS

2 - INJECTOR CLIP

3 - FUEL INJECTOR - TYPICAL

4 - FUEL RAIL - TYPICAL

NOTE: If the same fuel injector is to be reinstalled, install new O-rings.

NOTE: Apply a small amount of clean engine oil to each injector O-ring. This will aid in the installation.

Install the fuel injector (3) into the fuel rail (4) using a side to side motion while pushing injector into the fuel rail assembly.
Using suitable pliers (1), install the fuel injector retaining clip (2).
Install the fuel rail assembly. See Installation .
Start the engine and check for fuel leaks.