SENSOR, Fuel Temperature: Installation: Installation

Fig 1: Identifying O-Ring Seal & Sealing Washer

Courtesy of CHRYSLER LLC

1. Replace the O-ring seal (1) and sealing washer (2).
   Fig 2: Identifying Fuel Temperature Sensor Harness Connector

   Courtesy of CHRYSLER LLC
2. Install the fuel temperature sensor (1). Tighten to 15 N.m (133 in. lbs.).
3. Connect the fuel temperature sensor harness connector (2).
   Fig 3: Identifying Bolts & Heat Shield

   Courtesy of CHRYSLER LLC
4. Install heat shield (2). Tighten bolts (1) to 9 N.m (80 in. lbs.).
   Fig 4: Power Steering Fluid Reservoir & Mounting Bolt

   Courtesy of CHRYSLER LLC
5. Install coolant fan assembly. Refer to FAN, Cooling, Installation .
6. Install the power steering reservoir (2). Tighten bolt (1) to 12 N.m (106 in. lbs.).
   Fig 5: Identifying Upper Radiator Closure Panel

   Courtesy of CHRYSLER LLC
7. Install the radiator closure panel (2) and securely tighten the bolts (1), screws (3).
   Fig 6: Identifying Quarter Turn Lock Tabs & Air Inlet Duct

   Courtesy of CHRYSLER LLC
8. Install the air inlet duct (1).
9. Connect the negative battery cable.
10. Install engine cover (1).