MODULE, Steering Column Control: Installation: Installation: Assembly

Fig 1: Identifying Jumper Wire Harness Connector, Right Multi-function Switch & Clockspring

Courtesy of CHRYSLER LLC

1. Connect the right stalk electrical connector.
   Fig 2: Identifying Right Multi-function Switch Retaining Screw

   Courtesy of CHRYSLER LLC
2. Slide the right stalk into the groove and install the one retaining screw.
   Fig 3: Left Stalk Elect. Conn.

   Courtesy of CHRYSLER LLC
3. Connect the left stalk switch electrical connector.
   Fig 4: Identifying Left Stalk Retaining Screw

   Courtesy of CHRYSLER LLC
4. Install the left stalk switch retaining screw.