LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2012 >> Compass Limited, AWD, Standard >> Repair and Diagnosis >> Engine Performance >> Ignition System (Service Information) >> Solenoid, Variable Valve Timing >> Installation >> Front Solenoid 1/1
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Solenoid 1/1

Fig 1: Solenoid Mounting Tab 1/1
GC0082439Courtesy of CHRYSLER GROUP, LLC
  1. Solenoid for front location 1/1. Note mounting tab location is different between front and rear solenoids.
    Fig 2: Solenoid Mounting Bolt
    GC0082438Courtesy of CHRYSLER GROUP, LLC
  2. Install solenoid into cylinder head.
  3. Install mounting bolt and tighten to 12 N.m (9 ft. lbs.).
    Fig 3: Oil Pressure Sensor
    GC0082437Courtesy of CHRYSLER GROUP, LLC
  4. Install oil pressure sensor.
  5. Connect electrical connector to oil pressure sensor.
  6. Connect electrical connector to Variable valve timing solenoid.
  7. Connect negative battery cable.
  8. Install engine cover.
scientia non olet · About LEMON Manuals