Heater, Engine Block: Installation: 3.6L

Fig 1: 3.6L Engine Block Heater & Cylinder Block

Courtesy of CHRYSLER GROUP, LLC

Clean block core hole and heater seat.
Insert heater block (1) assembly.
With block heater seated, tighten screw (2) to 12N.M (106 in.lbs.) to assure a positive seal.
Install power cord plug to block heater (1).
Fill cooling system with coolant to the proper level. Refer to STANDARD PROCEDURE .

Fig 2: A/C Compressor
Courtesy of CHRYSLER GROUP, LLC
Install the A/C compressor. Refer to COMPRESSOR, A/C, INSTALLATION .