LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2012 >> Wrangler Rubicon, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection, Diesel >> Sensor, Air Temperature, Intake >> Removal >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sensor, Air Temperature, Intake: Removal: Removal

Fig 1: IAT/MAP Sensor Harness Connector, Bolt & IAT/MAP Sensor
GC0148204Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect the negative battery cable.
  2. Clean area around sensor.
  3. Disconnect IAT/MAP sensor harness connector (3).
  4. Remove bolt (2) and IAT/MAP sensor (1).
scientia non olet · About LEMON Manuals