Fuel Quantity Control Valve: Installation: Installation

Fig 1: O-Rings & Fuel Quantity Control Valve

Courtesy of CHRYSLER GROUP, LLC

1. Install new O-rings (1) onto the fuel quantity control valve (3).
   Fig 2: Fuel Quantity Control Valve & Bolts

   Courtesy of CHRYSLER GROUP, LLC
2. Install the fuel quantity control valve (1). Tighten bolts (2) to 7 N.m (62 in. lbs.).
   Fig 3: Fuel Quantity Control Valve Harness Connector

   Courtesy of CHRYSLER GROUP, LLC
3. Connect the fuel quantity control valve wire harness connector (1).
4. Install the mixing chamber. .
   Fig 4: Engine Cover

   Courtesy of CHRYSLER GROUP, LLC
5. Install the engine cover (1).
6. Connect the negative battery cable.