Block, Fuse: Installation: Installation
WARNING:
ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO RESTRAINTS - SERVICE INFORMATION BEFORE ATTEMPTING ANY STEERING COLUMN OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.
- Install the new wire harness and fuse block into the vehicle.
- Position the fuse block onto the mounting bracket and push down until the mounting clips are fully seated.
- Install the front bumper fascia. Refer to FASCIA, FRONT, REMOVAL .
- Connect the battery negative cable.