LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2014 >> Compass Limited, FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Fan, Cooling >> Installation >> Cooling Fan - Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cooling Fan - Installation

Fig 1: Lower, Fan Blade Retaining Nut & Fan Motor
GC0137791Courtesy of CHRYSLER GROUP, LLC
  1. Install the fan motor (5) onto shroud (3).
  2. Install the fan (6) onto the motor.
  3. Install the lower (8) shroud seal.
    Fig 2: Radiator Fan Assembly
    GC0083982Courtesy of CHRYSLER GROUP, LLC
  4. Install radiator fan module (1).
  5. Connect the electrical connectors.
  6. Install the wiring harness mounting retainers into fan shroud.
  7. Install the upper radiator hose support bracket (2).
  8. Install upper radiator hose to the radiator.
    Fig 3: Upper Core Support Seal Push Pins & Radiator Core Support Bolts
    GC0137790Courtesy of CHRYSLER GROUP, LLC
  9. Install the upper radiator core support. Tighten outer bolts (1) to 23 N.m (17 ft. lbs.). Tighten the inner support bolts to 8 N.m (6 ft. lbs.).
  10. Install the hood latch cable.
  11. Install the core support seal (3).
    Fig 4: Upper Radiator Closure Panel
    GC0137788Courtesy of CHRYSLER GROUP, LLC
  12. Install radiator closure panel (2). Refer to PANEL, CLOSURE, UPPER, INSTALLATION .
  13. Connect the negative battery cable.
  14. Fill the coolant to the proper level.
  15. Run vehicle. Check for proper fan operation and coolant level.
  16. Install the air intake duct.
scientia non olet · About LEMON Manuals