NOX Sensor 1/2

Fig 1: NOx Sensor Module Cover & Nuts (Sensor 1/2)

Courtesy of CHRYSLER GROUP, LLC

Disconnect the negative battery cable.
Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
Remove nuts (2) and NOx sensor 1/2 module cover (1).

Fig 2: NOx Sensor Wire Harness Connector (Sensor 1/2)
Courtesy of CHRYSLER GROUP, LLC
Disconnect the NOx sensor wire harness connector (2).
Disconnect the wire harness retainers.

Fig 3: NOx Sensor & O2 Sensor (Sensor 1/2)
Courtesy of CHRYSLER GROUP, LLC
Remove the NOx sensor 1/2 (2) from the Selective Catalytic Reduction (SCR) catalyst.