Tube, Fuel Transfer: Installation: Installation
Risk of injury to eyes and skin from contact with fuel. Wear protective clothing and eye protection. Risk of poisoning from inhaling and swallowing fuel. Pour fuel only into appropriately marked and approved containers. Failure to follow these instructions may result in possible serious or fatal injury.
The fuel system is under constant high pressure even with engine OFF. Until the fuel pressure has been properly released from the system, do not attempt to open the fuel system. Do not smoke or use open flames/sparks when servicing the fuel system. Make sure the area in which the vehicle is being serviced is in a well ventilated area. Failure to comply may result in serious or fatal injury.
It is necessary to remove the primary and secondary pumps to remove and install the pump transfer tube.
- Position the fuel pump transfer tube (2) into the fuel tank.NOTE:
Make sure the tube is not twisted while aligning the fittings (1) to the tank openings.
- Install the Primary Fuel Pump Module. Refer to MODULE, FUEL PUMP, INSTALLATION .
- Install the Secondary Fuel Pump Module
Refer to MODULE, FUEL PUMP, INSTALLATION .