Valve, Manifold Flow: Installation: Installation

Fig 1: Flow Management Shaft Slot

Courtesy of CHRYSLER GROUP, LLC

1. Make sure that slot in shaft is not damaged.
   Fig 2: Flow Management Valve Shaft

   Courtesy of CHRYSLER GROUP, LLC
2. Make sure that tab in valve is not damaged.
   Fig 3: Flow Valve Shaft & Mount

   Courtesy of CHRYSLER GROUP, LLC
3. Align tab in valve with slot in intake manifold shaft (2) and rotate valve counterclock wise until valve drops onto location pin mounting (1).
   Fig 4: Manifold Flow Valve Electrical Connector

   Courtesy of CHRYSLER GROUP, LLC
4. Install mounting bolts (1) and tighten to 6 N.m (53 in. lbs.).
5. Connect electrical connector (2).
6. Install air tube.
7. Connect negative battery cable.