Module, Steering Column Control: Installation: Installation: Assembly

Fig 1: Identifying Jumper Wire Harness Connector, Right Multi-Function Switch & Clockspring

Courtesy of CHRYSLER GROUP, LLC

1. Connect the right stalk electrical connector.
   Fig 2: Identifying Right Multi-Function Switch Retaining Screw

   Courtesy of CHRYSLER GROUP, LLC
2. Slide the right stalk into the groove and install the one retaining screw.
   Fig 3: Disconnecting/Connecting Left Stalk Electrical Connector

   Courtesy of CHRYSLER GROUP, LLC
3. Connect the left stalk switch electrical connector.
   Fig 4: Removing/Installing Left Multi-Function Switch Stalk Retaining Screw

   Courtesy of CHRYSLER GROUP, LLC
4. Install the left stalk switch retaining screw.