Sensor, Crankshaft Position: Removal: Removal

Disconnect the negative battery cable.

Fig 1: Upper Charge Air Tube, Lock Ring, Lower Charge Air Tube, Clamp & Charge Air Cooler (CAC) Inlet
Courtesy of CHRYSLER GROUP, LLC
Loosen the clamp (4) and disconnect the lower charge air tube (3) from the charge air cooler (CAC) inlet (5).
Release the lock ring (2) and remove the lower charge air tube (3) from upper charge air tube (1) to turbocharger.

Fig 2: Crankshaft Position Sensor Harness Connector
Courtesy of CHRYSLER GROUP, LLC
Disconnect the crankshaft position sensor wire harness connector (1).

Fig 3: Crankshaft Position Sensor & Bolt
Courtesy of CHRYSLER GROUP, LLC
Remove bolt (2) and the crankshaft position sensor (1).