Plug, Glow: Removal: Removal

Fig 1: Quarter Turn Lock Tabs & Air Inlet Duct

Courtesy of CHRYSLER GROUP, LLC

Release quarter turn lock tabs (1) and remove air inlet duct (2).
Disconnect the negative battery cable.
Remove engine cover.

Fig 2: Identifying Fuel Rail Pressure Regulator Harness Connector
Courtesy of CHRYSLER GROUP, LLC
Disconnect the fuel rail pressure sensor harness connector (2).

Fig 3: Lock Tabs & Engine Wire Harness
Courtesy of CHRYSLER GROUP, LLC
Release the four lock tabs (1) position aside engine wire harness (2).
Disconnect the glow plug four way wire harness connector.

Fig 4: Identifying Glow Plug Harness Connectors
Courtesy of CHRYSLER GROUP, LLC
Disconnect glow plug wire harness connector (1).

Fig 5: Identifying Glow Plugs
Courtesy of CHRYSLER GROUP, LLC

NOTE:
Clean the area around the glow plug of dirt and debris before removing.
Remove glow plugs (1) from cylinder head.