| Air Cond Refrigerant |
|
w/R-1234yf |
1.25 LBS. |
0.56 KG |
R-1234yf |
|
S |
| Air Cond Refrigerant |
|
w/R-134a |
1.38 LBS. |
0.62 KG |
R-134a |
|
S |
| Automatic Transmission Fluid |
Trans Mfr CD 845RE |
|
8.98 QTS. |
8.49 L |
MOPAR ZF 8&9 Speed Automatic Transmission Fluid, SHELL L 12108 |
|
S |
| Brake Fluid |
|
|
N/A |
N/A |
MORAR Brake Fluid DOT 3, SAE J1703 |
If MOPAR Brake Fluid DOT 3 is not available, then MOPAR Brake and Clutch Fluid DOT 4 (P/N04549625AC), is acceptable. |
S |
| Diesel Exhaust Fluid |
|
|
8.00 GALS. |
30.28 L |
MOPAR Diesel Exhaust Fluid (API Certified ) (DEF) or equivalent that has been API Certified to the ISO 22241 standards |
Use of fluids not API Certified to ISO 22241 may result in system damage. |
S |
| Differential Gear Oil |
|
Front Axle,195FIA FE |
0.90 QTS. |
0.85 L |
MOPAR GL-5 Synthetic Axle Lubricant, SAE 75W-85 |
|
S |
| Differential Gear Oil |
|
Front Axle,195FIA |
1.20 QTS. |
1.13 L |
MOPAR GL-5 Synthetic Axle Lubricant, SAE 75W-85 |
|
S |
| Differential Gear Oil |
|
Rear Axle,195RIA (Aluminum) |
1.00 QTS. |
0.94 L |
MOPAR GL-5 Synthetic Axle Lubricant, SAE 75W-85 |
|
S |
| Differential Gear Oil |
|
Rear Axle,215RII (Cast Iron) |
1.30 QTS. |
1.23 L |
MOPAR GL-5 Synthetic Axle Lubricant, SAE 75W-85 |
|
S |
| Differential Gear Oil |
|
Rear Axle,225RII (Cast Iron) |
1.50 QTS. |
1.41 L |
MOPAR GL-5 Synthetic Axle Lubricant, SAE 75W-85 |
|
S |
| Differential Gear Oil |
|
Rear Axle,230RIA w/ELSD (Aluminum) |
1.40 QTS. |
1.32 L |
MOPAR Gear and Axle Lubricant with Modifier, SAE 75W-85 |
Part No. 68083381 AA. |
S |
| Differential Gear Oil |
|
Rear Axle,230RIA w/ELSD (Aluminum) |
1.40 QTS. |
1.32 L |
MOPAR GL-5 Synthetic Axle Lubricant, SAE 75W-85 with friction modifier additive |
|
S |
| Differential Gear Oil |
|
Rear Axle,230RIA w/o ELSD (Aluminum) |
1.20 QTS. |
1.13 L |
MOPAR GL-5 Synthetic Axle Lubricant, SAE 75W-85 |
|
S |
| Engine Coolant |
3.6L Eng |
|
10.40 QTS. |
9.84 L |
MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) meeting the requirements of Chrysler Material Standard MS-12106 |
Includes: heater and coolant recovery tank filled to "max" level. |
S |
| Engine Oil |
3.6L Eng |
w/Filter |
6.00 QTS. |
5.67 L |
API - SAE 0W-20 |
|
S |
| Fuel Tank |
3.6L Eng |
|
25.00 GALS. |
94.63 L |
|
|
S |
| Power Steering Fluid |
3.6L Eng |
|
N/A |
N/A |
MOPAR Hydraulic Fluid |
|
S |
| Transfer Case Fluid |
T/Case Mfr CD MP2010 |
|
0.55 QTS. |
0.52 L |
Automatic Transmission Fluid approved to MB 236.10, MB 236.12 such as Shell ATF 3403/M-115, Fuchs/Shell ATF 3353, or equivalent. |
|
S |
| Windshield Washer Fluid |
|
|
N/A |
N/A |
Windshield Washer Solvent only |
Follow the Manufacturer's Instructions for the mixture ratio. |
S |