Solenoid, Variable Valve Timing: Installation: Left

Courtesy of CHRYSLER GROUP, LLC

Install the variable valve timing solenoid seals (1). The seals can be reused if not damaged.

Courtesy of CHRYSLER GROUP, LLC
Refer to the markings made at disassembly and install the intake variable valve timing solenoid (4) and the exhaust variable valve timing solenoid (2) in their original locations.
Install and securely tighten the variable valve timing solenoid mounting bolts (3).
Connect the electrical connector (1) to the variable valve timing solenoid.

Courtesy of CHRYSLER GROUP, LLC
Install the left front upper intake manifold support bracket (1) with two nuts (2) and two bolts (3). Tighten the nuts (2) to 10 N.m (89 in. lbs.) and tighten the bolts (3) to 10 N.m (89 in. lbs.).

Courtesy of CHRYSLER GROUP, LLC
Install the throttle body (1). Refer to THROTTLE BODY, INSTALLATION .
Install the engine cover. Refer to COVER, ENGINE, INSTALLATION .
Connect the negative battery cable.

NOTE:

The Cam/Crank Variation Relearn procedure must be performed using the scan tool anytime there has been a repair/replacement made to a powertrain system, for example: flywheel, valvetrain, camshaft and/or crankshaft sensors or components.